Tag Archives: planetary gear motors

China 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors custom planetary gearbox

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

planetarygearbox

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors     custom planetary gearboxChina 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors     custom planetary gearbox
editor by CX 2023-07-04

China 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors disadvantages of planetary gearbox

Warranty: 3months-1year
Model Number: KS-42P775
Use: BOAT, Auto, Electrical Bicycle, Admirer, House Appliance, Robotic hand, Powertools
Type: Equipment MOTOR
Torque: 5~one hundred twenty kg.cm
Building: Everlasting Magnet
Commutation: Brush
Protect Function: Entirely Enclosed
Speed(RPM): 10~2500RPM
Ongoing Current(A): 3.2 A~15 A
Efficiency: Ie three
Merchandise Name: 12V Generator 24V Brushed Dc Motors
Voltage: 6V 7.2V 9V 12V 18V 24V
Excess weight: .9 kg
Electrical power: 95W Max
Equipment Material: Metallic Equipment
Brush Kind: Carbon Brushed
Shaft Diameter: 8mm (Can Personalized)
Typical Applications: Robotic hand, Powertools
Certification: RoHS ce
Packaging Specifics: 20pcs/ cartonWeight: 20kg / carton

itemvalue
Brand TitleKSTONEMOTOR
Model NumberKS-42P775
CertificationsCE, ROHS
Continuous Present(A)3.2 A~fifteen A
EfficiencyIE three
Torque5~one hundred twenty kg.cm
Voltage6V 7.2V 9V 12V 18V 24V
Rated Velocity10~2500 rpm
Power95 W Max (Can tailored)
Specification Related Products Organization Profile HangZhoug Kstone Motor is a skilled micro gear box manufacturer. The gear box provided spur gear box, Planetary equipment box, P2K Bevel-helical gear stage Industrial Gearbox gear speed planetary reducer with CZPT shaft and ft Mounted worm gears, Wheelchair motor. Kstone Motor has often been an exceptional DC Gear Motors manufacturer.The motors are commonly utilized for Automotive, Property appliances, Individual treatment, Powertools, Business, and Intelligent merchandise which give healthier and hassle-free approaches in existence. Kstone Motor has a huge variety of generation gear, check equipment, equipment processing tools imported from Japan and Switzerland. Buyer Comments Packing & Shipping and delivery 1. 20PCS/Carton 2 Gross weight : twenty KG/Carton FAQ Q: Are you buying and selling organization or producer?A: We are manufacturing facility.Q: How to order?A: send us inquiry → Adjustable Stainless Steel Cuban Link Chain Treasured Huge Green Lava Stone Gentlemen Bracelet acquire our quotation → negotiate information → affirm the sample → CZPT contract/deposit → mass production → cargo completely ready → stability/shipping and delivery → additional cooperationQ: How about Sample purchase?A: Sample is obtainable for you. remember to contact us for particulars.Q: Which delivery way is accessible?A: DHL, FedEx, By Sea are obtainable. The other shipping and delivery techniques are also available, 8mm Organic Stone Beads en acier inoxydable Coronary heart Lover Friendship Bracelet Jewellery Length CZPT Magnetic Pair Bracelets you should make contact with us if you need ship by the other shipping and delivery way. Q: How lengthy is the provide, producing and shipping?A: Deliver time depends on the amount you purchase. typically it will take fifteen-twenty five functioning days.Q: How to validate the payment?A: We take payment by T/T, PayPal, the other payment ways also could be acknowledged, Please get in touch with us ahead of you spend by the other payment ways. Also fifty% deposit is accessible, the equilibrium income must be compensated just before shipping and delivery.Q: What is your phrases of payment?A: Payment=20000USD, fifty% T/T in progress , Sizzling sale gold crammed 3+1 figaro chain 1.5mm 2.4mm for bracelet necklaces girls jewellery making balance prior to shipment.If you have an additional question, remember to really feel totally free to speak to us.

planetarygearbox

Planetary Gearbox Components

The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.

CFHK Series

The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.

CFX Series

The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.

CAP Series

The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
planetarygearbox

CAPK Series

The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.

CFH Series

The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
planetarygearbox

CZPT

If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.

China 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors     disadvantages of planetary gearboxChina 1000 Rpm Planetary Gear Motor Gearbox 12V Generator 24V Brushed Dc Motors     disadvantages of planetary gearbox
editor by CX 2023-07-03

China 36mm Standard Metal Planetary Gearbox with Gear Motors

Product Description

We are a factory specialized in metal parts hardware & metal gearbox geared motor through powder metallurgy process .We services with ODM/OEM gearbox design and development , gearmotors manufacture.
A planetary gear set is made up of 3 types of gears , a sun gear , planet gears and a ring gear . The sun gear at high speed is located at the center of the gears , and transmits torque to the planet gears which are typically mounted on the moveable carrier .The planet gears around the central axis rotation ,mesh with the sun gear and an outer ring gear . As all the planet carriers turns , it delivers low-speed, high-torque output .

Features:
A planetary gearbox usually useded in the transmission :
For precise positioning
For a robot to increase the torque
For printing press to reduce the speed of the rollers

The advantages of planetary gear motors :

  1. Increased repeatability . Its  Its greater speed radial and axial load offers reliability and robustness, minimizing the misalignment of the gear. In addition, uniform transmission and low vibrations at different loads provide a perfect repeatability.
  2. Perfect precision: Most rotating angular stability improves the accuracy and reliability of the movement.
  3. Lower noise level because there is more surface contact. Rolling is much softer and jumps are virtually nonexistent.
  4. Greater durability: Due to its torsional rigidity and better rolling. To improve this feature, your bearings help reduce the losses that would occur by rubbing the shaft on the box directly. Thus, greater efficiency of the gear and a much smoother operation is achieved.
  5. Increased torque transmission: With more teeth in contact, the mechanism is CZPT to transmit and withstand more torque. In addition, it does it in a more uniform manner.
  6. Very good levels of efficiency: Planetary reducers offer greater efficiency and thanks to its design and internal layout losses are minimized during their work. In fact, today, this type of drive mechanisms are those that offer greater efficiency.
  7. Maximum versatility: Its mechanism is contained in a cylindrical gearbox, which can be installed in almost any space.

Description:
Product Name : 36mm planet gearbox with DC brushed motors  high torque geared motor / Speed reducer / steel gearbox
32mm
Gearbox Type: Planetary
Material: Steel 

No-load Speed: 3-1,375 rpm

Rated Load Speed: 3-1,280 rpm
 

No-load Current: 300-325 mA

Rated Load Current: 1,679-1,684 mA

16mm

No-load Speed: 4-1,373 rpm

Rated Load Speed: 3-1,125 rpm
No-load Current: 85-110 mA

Rated Load Current: 130-150 mA

20mm

No-load Speed: 7-1,636 rpm

Rated Load Speed: 7-1,420 rpm
No-load Current: 70-90 mA

Rated Load Current: 125-130 mA
 

No-load Speed: 6-1,886 rpm

Rated Load Speed: 5-1,675 rpm
 No-load Current: 100-120 mA

Rated Load Current: 295-300 mA
 

Gear Ratio : 5:1 , 10:1 , 20:1 , 25:1 , 30:1 , 40:1 , 50:1 , 60:1 ,70:1…100:1…  optional
Gearbox diameter : 6mm , 8mm , 12mm , 16mm , 22mm , 24mm ,28mm, 32mm ,36mm, 38mm , 42mm ……
12-24V available .

Application:
monitor,automatic vending machine,automatic cruise control,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster,printers,conditioning damper actuator,Car tail gate electric putter,tooth brush,vibrator, sanitary ware,coffee machine,Sweeping robot,etc.

Welcome send us drawings for OEM service .

 

Workshop

What is a Planetary Gearbox?

A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

planetary gearboxes

If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use 3 different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the 2 gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are 3 main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than 1 output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional 1 is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install 1 with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
planetarygearbox

planetary gearboxes with output shaft

The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are 2 or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have 3 components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These 3 components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetarygearbox

planetary gearboxes with integer number of teeth

When designing a planetary gearbox, 1 must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

China 36mm Standard Metal Planetary Gearbox with Gear Motors  China 36mm Standard Metal Planetary Gearbox with Gear Motors

China Cameras high torque 12V 24V brushless planetary Gear Motors

Product Description

Cameras high torque 12v 24v brushless planetary Gear Motors 

Main Features
1.;OEM/ODM 28mm gearbox plus 28mm brushless motor
2.;Small size dc gear motor with low speed and big torque
3.;28mm gear motor provide 2.;0Nm torque and more reliable
4.;Suitable to small diameter,; low noise and big torque application
5.;Dc Gear motors can match encoder,;11ppr
6.;Reduction ratio:;4,;14,;19,;27,;51,;71,;100,;139,;189,;264,;369,;516,;720
 

Model:;Motor GMP28-TEC2838
 
 
TEC2838-0630
Rated voltage:;6V DC Rated speed:;2200r/min Output power:;1.;8W
No-load speed:;3000r/min Rated torque:;80g.;cm Stall torque:;300g/cm
No-load current:;220mA Rated current:;0.;45mA Stall current:;2.;0A
 
 
TEC2838-1245
Rated voltage:;12V DC Rated speed:;3600r/min Output power:;4.;1W
No-load speed:;4500r/min Rated torque:;110g.;cm Stall torque:;430g/cm
No-load current:;200mA Rated current:;0.;55mA Stall current:;1.;8A
 
 
TEC2838-2460
Rated voltage:;24V DC Rated speed:;4400r/min Output power:;5.;9W
No-load speed:;6000r/min Rated torque:;130g.;cm Stall torque:;600g/cm
No-load current:;80mA Rated current:;0.;32mA Stall current:;2.;0A

Gear motor technical data :; GMP28-TEC2838-0630-XXX

Reduction ratio 4 19 27 51 100 189 264 369 516 720
Length mm 28.;5 36 36 43 43 50 50 50 50 50
No-load speed rpm 700 150 105 55 28 16 11 8 6 4
Rated speed rpm 550 115 80 43 22 12 8 6 4 3
Rated torque kg.;cm 0.;26 1.;1 1.;5 2.;4 4.;8 8 12 15 20 20
Max.;momentary tolerance torque kg.;cm 1.;0 4.;0 5.;7 9.;2 18 30 30 30 30 30

Gear motor technical data :; GMP28-TEC2838-1245-XXX

Reduction ratio 4 19 27 51 100 189 264 369 516 720
Length mm 28.;5 36 36 43 43 50 50 50 50 50
No-load speed rpm 1100 230 160 87 44 23 17 12 9 6
Rated speed rpm 900 190 130 70 36 19 14 10 7 5
Rated torque kg.;cm 0.;35 1.;4 2.;1 3.;4 6.;6 11 16 20 20 20
Max.;momentary tolerance torque kg.;cm 1.;4 5.;7 8 13 26 30 30 30 30 30

Gear motor technical data :; GMP28-TEC2838-2460-XXX

Reduction ratio 4 19 27 51 100 189 264 369 516 720
Length mm 28.;5 36 36 43 43 50 50 50 50 50
No-load speed rpm 1450 300 215 58 30 22 16 11 9 8
Rated speed rpm 1100 230 160 85 44 23 17 12 9 7
Rated torque kg.;cm 0.;4 1.;7 2.;5 4.;0 8 13 19 20 20 20
Max.;momentary tolerance torque kg.;cm 1.;9 8 11 18 30 30 30 30 30 30

Product Application

Other Applications:;
Business Machines:; ATM,; Copiers and Scanners,; Currency Handling,; Point of Sale,; Printers,; Vending Machines.;
Food and Beverage:; Beverage Dispensing,; Hand Blenders,; Blenders,; Mixers,; Coffee Machines,; Food Processors,; Juicers,; Fryers,; Ice Makers,; Soy Bean Milk Makers.;
Home Entertainment and Gaming:; Gaming Machines,; Video Games,; Optical Disk Drives,; RC and Power Toys.;
Home Technologies:; Home Ventilation,; Air Purifiers and Dehumidifiers,; Range Hoods,; Washers and Dryers,; Refrigerators,; Dishwashers,; Floor Care,; Whirlpool and Spa,; Showers,; Smart Metering,; Coffee Machines.;
Lawn and Garden:; Lawn Mowers,; Snow Blowers,; Trimmers,; Leaf Blowers.;
Personal Care:; Hair Cutting,; Hair Care,; Massagers.;
Power Tools:; Drills and Drivers,; Sanders,; Grinders,; Polishers,; Saws.;
Camera and Optical:; Video,; Cameras,; Projectors.;

 
Packing & Delivery
Packaging:; single carton packing,; 100 pieces per box.;
Shipping time:;
DHL:; 3-5 working days ;
UPS:; 5-7 working days;
TNT:; 5-7 working days;
FedEx:; 7-9 working days;
EMS:; 12-15 working days;
By Sea:; Depends on which country

Our Company 
TT Motor (HK); Industrial Co.;,; Ltd has been specializing in micro motors,; gear motors and their respective parts since 2000.;
Our products are widely used in entertainment systems,; automobiles,; home and industrial appliances and tools and many others.; Our products are dependable and long-lasting,; and backed by years of experience.; We export 98% of our output worldwide.; 
By leveraging our hard-won reputation for honesty,; dependability and quality,; TT Motor aims to continue as a pioneer in the sales overseas by seeking global partners.; If your company is an end-user of micro-motors,; a distributor or an agent,; please contact us.; We look forward to being CZPT to work together with you in the near future.;

FAQ
Q:; How to order?
A:; send us inquiry → receive our quotation → negotiate details → confirm the sample → sign contract/deposit → mass production → cargo ready → balance/delivery → further cooperation.;
Q:; How about Sample order?
A:; Sample is available for you.; please contact us for details.; Contact us
Q:; Which shipping way is avaliable?
A:; DHL,; UPS,; FedEx,; TNT,; EMS,; China Post,;Sea are available.;The other shipping ways are also available,; please contact us if you need ship by the other shipping way.; 
Q:; How long is the deliver?
A:; Devliver time depends on the quantity you order.; usually it takes 15-25 working days.;
Q:; My package has missing products.; What can I do?
A:; Please contact our support team and we will confirm your order with the package contents.;We apologize for any inconveniences.; 
Q:; How to confirm the payment?
A:; We accept payment by T/T,; PayPal,; the other payment ways also could be accepted,;Please contact us before you pay by the other payment ways.; Also 30-50% deposit is available,; the balance money should be paid before shipping.;

The Basics of a Planetary Gearbox

The basic model of a planetary gearbox is a highly efficient transmission that transmits nearly 90 percent of the power it receives. The basic planetary gearbox comes in 3 basic types: Inline, Helical, and Spur. Below, we will discuss the differences between each of them and which 1 is better for your needs. A planetary gearbox is an important part of any engine and may be the perfect choice for your vehicle.
planetarygearbox

Inline planetary gearbox

An inline planetary gearbox has an inline arrangement of gears that enables the transfer of power. Its design makes it stable and reliable, and the space and weight-saving benefits make it a popular choice for many applications. Planetary gearboxes have low inertia, high torque, and a wide range of reduction ratios, which make them a versatile choice for many industries. To find out more about this type of gearbox, read about its construction and specifications.
A planetary gearbox is composed of 2 parts: a sun gear (also called the central or input gear), and 2 planet gears (also called outer gears). These gears are connected to each other via a carrier. In order to get the best performance from your gearbox, it’s important to find a model with the features and benefits required for your application. Also, be sure to check out the delivery time, global availability, and customer service of your selected constructor. A few constructors are faster than others and have the ability to respond quickly, while others can deliver every single planetary gearbox out of stock.
Whether you’re using an inline planetary gearbox for your car’s transmission, or you’re building a new machine, it’s important to choose the right size for your application. The most common ratio is five:1, but an inline gearbox can be as high as 1000:1! The torque range is between 250-950 lb-in for continuous torque, and up to 5800 lb-in for yield torque. Some companies even offer custom shafts if you need them to fit a specific application.
Inline planetary gearboxes have a high ratio of helical rotation and are useful for applications where space is limited. Their low-backlash design allows them to handle high torques and high accelerations without backlash. Despite their compact size, planetary gear systems also have high single-stage reduction ratios, a feature that makes them ideal for a variety of industrial applications. They can also be connected for high reduction ratios.
An inline planetary gearbox can be used in many applications, from small tools to heavy industrial machinery. Its basic design includes 3 components: an input gear pair, an output gear pair, and a stationary position. Some planetary gearbox designs also include additional gear sets that can provide a slight offset between input and output. A planetary gearbox may also contain multiple bearings, which make the assembly more robust and reliable.
Inline planetary gear reducers are commonly used in industrial settings to slow down an electric motor. They are able to multiply torque, which means they can reduce the input speed to a level where the mechanical devices inside the motor can function properly. This type of gear reducer also has a low clearance, which makes it ideal for machines with high torque. However, you should consider the amount of torque required in your application before you make a purchase.
planetarygearbox

Helical planetary gearbox

A helical planetary gearbox is a type of mechanical system. The gears are connected by joints to the carrier that holds the planets stationary. The sun gear serves as an input to the other gears, and the planet gears rotate at a rate that depends on the number of teeth in each gear. The ratio between these gears is -Ns/Np, and the number of teeth in the ring is N r, N s, and N p.
Another type of planetary gearbox uses multiple helical axes to distribute the load. This design also offers high stiffness and low backlash, which is important for applications involving frequent start-stop cycles and rotational direction changes. It also features a compact design and low mass inertia. A helical planetary gearbox can be used for a wide range of applications. Listed below are some of the benefits of helical gear technology.
The basic design of a helical planetary gear is based on the principle of stepping planets. This concept eliminates the need for timing marks and restrictive assembly conditions. The planetary gear’s helical shape can be modified to achieve a greater transmission ratio in an equal or smaller volume. For example, a 50-T ring gear will yield the same effect as a 100-T ring gear.
In addition to the helical axis, a helical planetary gearbox also has a wide variety of secondary features that are critical to torque transmission. For instance, compact needle roller bearings are appropriate for a helical planetary gearbox because of their low-profile design and small space. However, a tapered roller bearing is better suited to handling high axial forces. In general, a helical planetary gearbox will have a higher efficiency rate and lower noise levels.
A helical planetary gearbox will have a number of components that can vary in size and shape. They will include a sun gear and many planetary parts. The central sun gear will take a low-torque input and will run multiple external gears to increase the torque and speed. This basic model of a planetary gearbox is highly efficient, transferring 97% of the power input. There are 3 main types of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
The CZPT is a good example of an entry-level helical planetary gearbox. It is extremely reliable and aimed at providing torque in quiet applications with high precision. The Access series is another option, which is designed to meet the needs of the low-backlash planetary gearbox market. It features helical planetary gears with 5 to 8 arc-minutes backlash, and is built on a monobloc housing.
A helical planetary gearbox is widely used in 3D printing. They are lightweight and can provide a high gear ratio. In addition to their low weight and high efficiency, some people have installed them into 3D printers to improve the accuracy of their designs. And in addition to 3D printing, helical gears are used in many industrial applications. If you’re thinking about purchasing one, you should know what the benefits are.
planetarygearbox

Spur planetary gearbox

There are many advantages to a spur planetary gearbox, from its compact design and low cost to its unmatched power transmission capacity per unit volume. Planetary gears have high efficiency per stage and can achieve up to 95% efficiency, depending on the ratio. Planet gears are mounted on a joint carrier, and the output rotation speed is slower than the drive rotation speed, which leads to increased torque. The higher the gear wheels, the more torque the unit can produce.
A spur planetary gearbox incorporates multiple other gear sets that must have helical teeth. These other gear sets must be helical, and the motor must be aligned with the driven parts. The spur gears are the most efficient type of planetary gear, as their teeth are symmetrical, which means no axial forces are generated. The difference between a spur and a planetary gearbox is its shape.
The right angle spur planetary gearbox is a versatile design with a spiral bevel gear that provides superior smoothness and quiet operation. This gearhead is case-hardened and ground to increase its efficiency. These gears can be purchased in 3-100 ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
A spur planetary gearbox utilizes spur gears around the circumference of the mechanism. The spur gears rotate between gears that have internal and external teeth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and sun gears. A spur gearbox can also be considered a compound planetary gear. It is typically used for servo applications. Unlike spur gears, helical planetary gears are easier to maintain and have lower noise levels.
The most notable difference between a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur gear head is less complex, but cannot handle the same amount of load as a planetary gearhead. Both types can achieve the same backlash, but a planetary gearhead has better lubrication retention than a spur gear. It can run at higher speeds without excessive lubrication, while a spur gear drive is more efficient at low speeds. The reduction ratio of a planetary gearhead is near unity while that of a planetary gear head is many thousand to one.
A planetary gearbox has many applications. Plastic machinery, goods & personnel lifts, and machine tools are all prime examples of these types of gearing systems. Other industries that use these gears include wind turbines and sugar crystallizers, as well as steel and sugar mills. And of course, the use of planetary gears is not limited to these industries. It is used in many different ways, including slewing drives, mill drive, and derrick & dockyard cranes

China Cameras high torque 12V 24V brushless planetary Gear Motors  China Cameras high torque 12V 24V brushless planetary Gear Motors

China 24V Planetary DC Motors 82mm Brushed Gear Motor with Gearbox

Product Description

Product Pictures


Product Parameter

Brush Motor Technical Data:

Model

Voltage

Power

No-Load Current

No-Load Speed

Rated Current

Rated Speed

Rated Torque

Z32DPN2410-40S

24V

10W

0.40A

5000rpm

0.7A

4000rpm

0.571N.m

Z32DPN2415-50S

24V

15W

0.50A

6000rpm

1.1A

5000rpm

0.571N.m

Brush DC Planetary Gear Motor Technical Data-62DPN2490-30S:

Ratio

3.7

4.29

5.18

6.75

14

19

25

29

Out-put Speed(rpm)

1081

932

772

592

285

210

160

137

Allowable Torque(N.m)

0.08

0.092

0.111

0.145

0.27

0.367

0.483

0.561

Reduction Stage

1

1

1

1

2

2

2

2

 

 

 

 

 

 

 

 

 

Ratio

35

46

51

68

79

93

100

115

Out-put Speed(rpm)

114

87

78

59

50

43

40

35

Allowable Torque(N.m)

0.6777

0.89

0.889

1.185

1.3777

1.621

1.743

2.004

Reduction Stage

2

2

3

3

3

3

3

3

 

 

 

 

 

 

 

 

 

Ratio

130

150

169

195

236

308

 

 

Out-put Speed(rpm)

31

26

23

20

17

13

 

 

Allowable Torque(N.m)

2.266

2.614

2.945

3.400

4.000

4.000

 

 

Reduction Stage

3

3

3

3

3

3

 

 

Product Advantages

Planetary gear reducer is a new generation of practical products independently developed by our company ,which has the following main features:

*Low noise                *Hight torque

*Low Backlash           *High stability

*High efficiency          *High input speed


Product detailsProduct Application
Related Products:
Our products have the features of small size,light weight,high bearing capacity ,long service life,smooth
operation ,low noise,large output torque,high speed ratio,high efficiency and safe performance.
It has the characteristics of power split and multi-tooth meshing.

We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors,
Brushless DC Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc
.

You can email us to recommend needed motors per your specification.

Company profile


LunYee Culture:

L-Loyalty to Customers

U-Unity of working together

N-New things introduced by us in our industry

Y-Yield returns and enjoy together

E- Easy to buy

E- Easy to use

A satisfying one-stop service comes from our continuous innovation team and our rigorously-inspected sub-contracters!
Our products are widely applied to machine tools, industrial robot,textile machine,packing machine,food machine, medical appliance,CNC system and air condition and so on!

FAQ:
Q1. Can I have a sample order?

A: Yes, we can sell a sample, sit is pleased to receive a sample order to test and check the quality of products.

Q2. How long is the warranty?
A: The products come with a one-year warranty.

Q3. Can our logo be printed on this product?
A: Yes, please inform us formally before production and confirm the design firstly based on our sample.

A Brief Overview of the Spur Gear and the Helical Planetary Gearbox

This article will provide a brief overview of the Spur gear and the helical planetary gearbox. To learn more about the advantages of these gearboxes, read on. Here are a few common uses for planetary gears. A planetary gearbox is used in many vehicles. Its efficiency makes it a popular choice for small engines. Here are 3 examples. Each has its benefits and drawbacks. Let’s explore each one.
planetarygearbox

helical planetary gearbox

In terms of price, the CZPT is an entry-level, highly reliable helical planetary gearbox. It is suitable for applications where space, weight, and torque reduction are of high concern. On the other hand, the X-Treme series is suitable for applications requiring high-acceleration, high-axial and radial loads, and high-speed performance. This article will discuss the benefits of each type of planetary gearbox.
A planetary gearbox’s traction-based design is a variation of the stepped-planet design. This variation relies on the compression of the elements of the stepped-planet design. The resulting design avoids restrictive assembly conditions and timing marks. Compared to conventional gearboxes, compound planetary gears have a greater transmission ratio, and they do so with an equal or smaller volume. For example, a 2:1 ratio compound planet would be used with a 50-ton ring gear, and the result would be the same as a 100-ton ring gear, but the planetary disks would be half the diameter.
The Helical planetary gearbox uses 3 components: an input, an output, and a stationary position. The basic model is highly efficient and transmits 97% of the input power. There are 3 main types of planetary gearboxes, each focusing on a different performance characteristic. The CZPT basic line is an excellent place to start your research into planetary gearboxes. In addition to its efficiency and versatility, this gearbox has a host of modular features.
The Helical planetary gearbox has multiple advantages. It is versatile, lightweight, and easy to maintain. Its structure combines a sun gear and a planet gear. Its teeth are arranged in a way that they mesh with each other and the sun gear. It can also be used for stationary applications. The sun gear holds the carrier stationary and rotates at the rate of -24/16 and -3/2, depending on the number of teeth on each gear.
A helical planetary gearbox can reduce noise. Its shape is also smaller, reducing the size of the system. The helical gears are generally quieter and run more smoothly. The zero helix-angle gears, in contrast, have smaller sizes and higher torque density. This is a benefit, but the latter also increases the life of the system and is less expensive. So, while the helical planetary gearbox has many advantages, the latter is recommended when space is limited.
The helical gearbox is more efficient than the spur gear, which is limited by its lack of axial load component. The helical gears, on the other hand, generate significant axial forces in the gear mesh. They also exhibit more sliding at the points of tooth contact, adding friction forces. As such, the Helical planetary gearbox is the preferred choice in servo applications. If you’re looking for a gearbox to reduce noise and improve efficiency, Helical planetary gearboxes are the right choice.
The main differences between the 2 types of planetary gears can be found in the design of the 2 outer rings. The outer ring is also called the sun gear. The 2 gears mesh together according to their own axes. The outer ring is the planetary gear’s carrier. Its weight is proportional to the portion of the ring that is stationary. The carrier sets the gaps between the 2 gears.
Helical gears have angled teeth and are ideal for applications with high loads. They are also extremely durable and can transfer a high load. A typical Helical gearbox has 2 pairs of teeth, and this ensures smooth transmission. In addition, the increased contact ratio leads to lower fluctuations in mesh stiffness, which means more load capacity. In terms of price, Helical planetary gears are the most affordable gearbox type.
The outer ring gear drives the inner ring gear and surrounding planetary parts. A wheel drive planetary gearbox may have as much as 332,000 N.m. torque. Another common type of planetary gearbox is wheel drive. It is similar to a hub, but the outer ring gear drives the wheels and the sun gear. They are often combined over a housing to maximize size. One-stage Helical gears can be used in bicycles, while a two-stage planetary gear system can handle up to 113,000 N.m. torque.
The design of a helical planetary geartrain is complicated. It must comply with several constraints. These constraints relate to the geometrical relationship of the planetary geartrains. This study of the possible design space of a Helical geartrain uses geometric layouts. The ring gear, sun, and ring gear have no effect on the ratio of the planetary transmission. Nonetheless, helical geartrains are a good choice for many applications.
planetarygearbox

Spur gear planetary gearbox

The combination of planetary gears and spur gears in a transmission system is called a planetary or spur gearbox. Both the planetary gear and spur gear have their own characteristics and are used in various kinds of vehicles. They work in a similar way, but are built differently. Here are some important differences between the 2 types of gears. Listed below are some of the most important differences between them:
Helical gears: As opposed to spur gears, helical gears generate significant axial forces in the gear mesh. They also feature greater sliding contact at the point of tooth contact. The helix angle of a gearbox is generally in the range of 15 to 30 degrees. The higher the helix angle, the more axial forces will be transmitted. The axial force in a helical gearbox is greater than that of a spur gear, which is the reason why helical gears are more efficient.
As you can see, the planetary gearhead has many variations and applications. However, you should take care in selecting the number of teeth for your planetary gear system. A five:1 spur gear drive ratio, for example, means that the sun gear needs to complete 5 revolutions for every output carrier revolution. To achieve this, you’ll want to select a sun gear with 24 teeth, or 5 mm for each revolution. You’ll need to know the metric units of the planetary gearhead for it to be compatible with different types of machines.
Another important feature of a planetary gearbox is that it doesn’t require all of the spur gears to rotate around the axis of the drive shaft. Instead, the spur gears’ internal teeth are fixed and the drive shaft is in the same direction as the output shaft. If you choose a planetary gearbox with fixed internal teeth, you’ll need to make sure that it has enough lubrication.
The other significant difference between a spur gear and a planetary gearbox is the pitch. A planetary gearbox has a high pitch diameter, while a spur gear has low pitch. A spur gear is able to handle higher torques, but isn’t as efficient. In addition, its higher torque capability is a big drawback. Its efficiency is similar to that of a spur gear, but it is much less noisy.
Another difference between planetary and spur gear motors is their cost. Planetary gear motors tend to be more expensive than spur gear motors. But spur gears are cheaper to produce, as the gears themselves are smaller and simpler. However, planetary gear motors are more efficient and powerful. They can handle lower torque applications. But each gear carries a fixed load, limiting their torque. A spur gear motor also has fewer internal frictions, so it is often suited for lower torque applications.
Another difference between spur gears and planetary gears is their orientation. Single spur gears are not coaxial gearboxes, so they’re not coaxial. On the other hand, a planetary gearbox is coaxial, meaning its input shaft is also coaxial. In addition to this, a planetary gearbox is made of 2 sets of gear wheels with the same orientation. This gives it the ability to achieve concentricity.
Another difference between spur gears and planetary gears is that a planetary gear has an integer number of teeth. This is important because each gear must mesh with a sun gear or a ring gear. Moreover, each planet must have a corresponding number of teeth. For each planet to mesh with the sun, the teeth must have a certain distance apart from the other. The spacing between planets also matters.
Besides the size, the planetary gear system is also known as epicyclic gearing. A planetary gear system has a sun gear in the center, which serves as the input gear. This gear has at least 3 driven gears. These gears engage with each other from the inside and form an internal spur gear design. These gear sets are highly durable and able to change ratios. If desired, a planetary gear train can be converted to another ratio, thereby enhancing its efficiency.
Another important difference between a spur gear and a planetary gearbox is the type of teeth. A spur gear has teeth that are parallel to the shaft, while a planetary gear has teeth that are angled. This type of gear is most suitable for low-speed applications, where torque is necessary to move the actuation object. Spur gears also produce noise and can damage gear teeth due to repeated collisions. A spur gear can also slip, preventing torque from reaching the actuation object.

China 24V Planetary DC Motors 82mm Brushed Gear Motor with Gearbox  China 24V Planetary DC Motors 82mm Brushed Gear Motor with Gearbox

China Gear Reducer Planetary Gearbox Reduction Transmission Gear Box for Gear Motors

Product Description

Gear Reducer Planetary Gearbox Reduction Transmission Gear Box for Gear Motors

Model: 2Nm
Rating Power :0.25KW-200kw

Description :

N series of planetary reducers from SGR are widely used for industrial and heavy duty severe applications . planetary reducer feature with compact size, low noise , excellent reliability ,long life . In-line or right-angle planetary gearboxes are available in male and female shaft configurations. The CZPT male shaft solution (splined or cylindrical) is CZPT to withstand strong radial or axial loads on the output shaft. As a leading planetary gearbox manufactory in China , SGR planetary reducer is produced by modular design, combined according to customer requirement, housing material from CZPT with nodular cast iron which can increases gearbox’s rigidity and antiknock, heavy-duty bearing is installed at low-speed shaft, it can bear big radial load due to proportionate distribution of torque ,every CZPT gears are case hardened to get high reliability and long life . SGR planetary reducer have 16 models for different torque range ,each CZPT model have 1-5 stages to achieve different ratios , SGR planetary reducer have wide rang selection of high speed design: cylindrical with key, hydraulic motor, electric motor .Installation in CZPT is multiposition ,various fasten type .

N series planetary gearbox torque sheet with models
 

Gear unit size 200 201 240 241 280 281 353/354 355 400 401
Normal output torque
T2N[Nm]
1500 2000 3500 4000 4300 7300 13000 16000 20000 23000
Gear unit size 428 429 445 446 510 542 543 695 810 885
Normal output torque
T2N[Nm]
26000 30000 32000 43000 63000 75000 100000 150000 300000 420000

 

    The Basics of a Planetary Gearbox

    The basic model of a planetary gearbox is a highly efficient transmission that transmits nearly 90 percent of the power it receives. The basic planetary gearbox comes in 3 basic types: Inline, Helical, and Spur. Below, we will discuss the differences between each of them and which 1 is better for your needs. A planetary gearbox is an important part of any engine and may be the perfect choice for your vehicle.
    planetarygearbox

    Inline planetary gearbox

    An inline planetary gearbox has an inline arrangement of gears that enables the transfer of power. Its design makes it stable and reliable, and the space and weight-saving benefits make it a popular choice for many applications. Planetary gearboxes have low inertia, high torque, and a wide range of reduction ratios, which make them a versatile choice for many industries. To find out more about this type of gearbox, read about its construction and specifications.
    A planetary gearbox is composed of 2 parts: a sun gear (also called the central or input gear), and 2 planet gears (also called outer gears). These gears are connected to each other via a carrier. In order to get the best performance from your gearbox, it’s important to find a model with the features and benefits required for your application. Also, be sure to check out the delivery time, global availability, and customer service of your selected constructor. A few constructors are faster than others and have the ability to respond quickly, while others can deliver every single planetary gearbox out of stock.
    Whether you’re using an inline planetary gearbox for your car’s transmission, or you’re building a new machine, it’s important to choose the right size for your application. The most common ratio is five:1, but an inline gearbox can be as high as 1000:1! The torque range is between 250-950 lb-in for continuous torque, and up to 5800 lb-in for yield torque. Some companies even offer custom shafts if you need them to fit a specific application.
    Inline planetary gearboxes have a high ratio of helical rotation and are useful for applications where space is limited. Their low-backlash design allows them to handle high torques and high accelerations without backlash. Despite their compact size, planetary gear systems also have high single-stage reduction ratios, a feature that makes them ideal for a variety of industrial applications. They can also be connected for high reduction ratios.
    An inline planetary gearbox can be used in many applications, from small tools to heavy industrial machinery. Its basic design includes 3 components: an input gear pair, an output gear pair, and a stationary position. Some planetary gearbox designs also include additional gear sets that can provide a slight offset between input and output. A planetary gearbox may also contain multiple bearings, which make the assembly more robust and reliable.
    Inline planetary gear reducers are commonly used in industrial settings to slow down an electric motor. They are able to multiply torque, which means they can reduce the input speed to a level where the mechanical devices inside the motor can function properly. This type of gear reducer also has a low clearance, which makes it ideal for machines with high torque. However, you should consider the amount of torque required in your application before you make a purchase.
    planetarygearbox

    Helical planetary gearbox

    A helical planetary gearbox is a type of mechanical system. The gears are connected by joints to the carrier that holds the planets stationary. The sun gear serves as an input to the other gears, and the planet gears rotate at a rate that depends on the number of teeth in each gear. The ratio between these gears is -Ns/Np, and the number of teeth in the ring is N r, N s, and N p.
    Another type of planetary gearbox uses multiple helical axes to distribute the load. This design also offers high stiffness and low backlash, which is important for applications involving frequent start-stop cycles and rotational direction changes. It also features a compact design and low mass inertia. A helical planetary gearbox can be used for a wide range of applications. Listed below are some of the benefits of helical gear technology.
    The basic design of a helical planetary gear is based on the principle of stepping planets. This concept eliminates the need for timing marks and restrictive assembly conditions. The planetary gear’s helical shape can be modified to achieve a greater transmission ratio in an equal or smaller volume. For example, a 50-T ring gear will yield the same effect as a 100-T ring gear.
    In addition to the helical axis, a helical planetary gearbox also has a wide variety of secondary features that are critical to torque transmission. For instance, compact needle roller bearings are appropriate for a helical planetary gearbox because of their low-profile design and small space. However, a tapered roller bearing is better suited to handling high axial forces. In general, a helical planetary gearbox will have a higher efficiency rate and lower noise levels.
    A helical planetary gearbox will have a number of components that can vary in size and shape. They will include a sun gear and many planetary parts. The central sun gear will take a low-torque input and will run multiple external gears to increase the torque and speed. This basic model of a planetary gearbox is highly efficient, transferring 97% of the power input. There are 3 main types of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
    The CZPT is a good example of an entry-level helical planetary gearbox. It is extremely reliable and aimed at providing torque in quiet applications with high precision. The Access series is another option, which is designed to meet the needs of the low-backlash planetary gearbox market. It features helical planetary gears with 5 to 8 arc-minutes backlash, and is built on a monobloc housing.
    A helical planetary gearbox is widely used in 3D printing. They are lightweight and can provide a high gear ratio. In addition to their low weight and high efficiency, some people have installed them into 3D printers to improve the accuracy of their designs. And in addition to 3D printing, helical gears are used in many industrial applications. If you’re thinking about purchasing one, you should know what the benefits are.
    planetarygearbox

    Spur planetary gearbox

    There are many advantages to a spur planetary gearbox, from its compact design and low cost to its unmatched power transmission capacity per unit volume. Planetary gears have high efficiency per stage and can achieve up to 95% efficiency, depending on the ratio. Planet gears are mounted on a joint carrier, and the output rotation speed is slower than the drive rotation speed, which leads to increased torque. The higher the gear wheels, the more torque the unit can produce.
    A spur planetary gearbox incorporates multiple other gear sets that must have helical teeth. These other gear sets must be helical, and the motor must be aligned with the driven parts. The spur gears are the most efficient type of planetary gear, as their teeth are symmetrical, which means no axial forces are generated. The difference between a spur and a planetary gearbox is its shape.
    The right angle spur planetary gearbox is a versatile design with a spiral bevel gear that provides superior smoothness and quiet operation. This gearhead is case-hardened and ground to increase its efficiency. These gears can be purchased in 3-100 ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
    A spur planetary gearbox utilizes spur gears around the circumference of the mechanism. The spur gears rotate between gears that have internal and external teeth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and sun gears. A spur gearbox can also be considered a compound planetary gear. It is typically used for servo applications. Unlike spur gears, helical planetary gears are easier to maintain and have lower noise levels.
    The most notable difference between a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur gear head is less complex, but cannot handle the same amount of load as a planetary gearhead. Both types can achieve the same backlash, but a planetary gearhead has better lubrication retention than a spur gear. It can run at higher speeds without excessive lubrication, while a spur gear drive is more efficient at low speeds. The reduction ratio of a planetary gearhead is near unity while that of a planetary gear head is many thousand to one.
    A planetary gearbox has many applications. Plastic machinery, goods & personnel lifts, and machine tools are all prime examples of these types of gearing systems. Other industries that use these gears include wind turbines and sugar crystallizers, as well as steel and sugar mills. And of course, the use of planetary gears is not limited to these industries. It is used in many different ways, including slewing drives, mill drive, and derrick & dockyard cranes

    China Gear Reducer Planetary Gearbox Reduction Transmission Gear Box for Gear Motors  China Gear Reducer Planetary Gearbox Reduction Transmission Gear Box for Gear Motors

    China High Precision Planetary Gear Stepper Motors with Square Shaped Flange Mounting

    Product Description

     

    Product Description

    High Precision Planetary Gear Stepper Motor

    The high precision planetary gear stepper motor is high precision and low noise with precision steel teeth,can withstand greater axial force and radial force. Higher concentricity, more stable transmission. These motors are available in standard:
    Nema 17(42*34, 42*40)
    Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40, 1:50,1:70;1:100. 
    Nema 23(57*55)
    Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40
    Nema 24(60*55)
    Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40
    And 48 hours delivery, in stock .

    Application:
    Automation control, medical equipment, textile machinery, and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric  curtains, electric shutters, etc
     

    Product Parameters

    Planetary Gear Box Specification:

    General Specification:
    Housing Material Metal
    Bearing at Output Ball Bearings
    Max.Radial Load(10mm from flange) 300N
    Max.Shaft Axial Load 100N
    Backlash at No-load 1 stage≤15′,2 stage≤20′

     

    42HS Hybrid Stepping Motor Specifications:
    Model No. Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
    Voltage /Phase /Phase /Phase
    Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
    42HSC1409 34 2.93 1.3 2.2 3.5 270 4 30 0.22 ≤1:100
    42HSC4409 40 2.5 1.5 1.65 3.3 380 4 40 0.3 ≤1:100

    42HSC1409 Planetary Gearbox Specifications:
    Reduction ratio 4 5 7 10 16 20 25 28 35 40 50 70
    Total Height(L1+L2) (mm) 69 69 69 69 80 80 80 80 80 80 80 80
    Output torque ( mN.m) 1036 1296 1814 2592 4060 5076 6345 7106 8883 10000 10000 10000
    Total Weight(g) 470 470 470 470 570 570 570 570 570 570 570 570
    Number of gear trains 1 2
    Reducer Length(L2)   (mm) 35 46
    Efficiency 96% 94%

    42HSC4409 Planetary Gearbox Specifications:
    Reduction ratio 4 5 7 10 16 20 25 28 35 40 50 70
    Total Height(L1+L2) (mm) 75 75 75 75 86 86 86 86 86 86 86 86
    Output torque ( mN.m) 1459 1824 2553 3648 5715 7144 8930 10000 10000 10000 10000 10000
    Total Weight(g) 550 550 550 550 650 650 650 650 650 650 650 650
    Number of gear trains 1 2
    Reducer Length(L2)   (mm) 35 46
    Efficiency 96% 94%

    Detailed Photos

     

    Company Profile

    ZheJiang UMot Technology Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and related motion control products, customizing and designing high-quality motor products for users with special needs around the world, and providing overall solutions for motion control systems. Products are exported to more than 30 countries and regions including the United States, Germany, France, Italy, Russia, and Switzerland. The company’s main products and system design have been widely used in automation control, precision instruments, medical equipment, smart home, 3D printing and many other fields.
    Our company has been recognized as a high-tech enterprise by relevant departments, has a complete quality management system, has obtained ISO9001, CE, RoHs and other related certifications, and holds a number of electrical patent certificates. “Concentration, Professionalism, Concentration” in the field of automation of motor R&D and system control solutions is the company’s business purpose. “Be your most trusted partner” is the company’s service philosophy. We have always been aiming to “make first-class products with professional technology”, keep pace with the times, innovate constantly, and provide more users with better products and services.

    FAQ

    1. Shipping method:
    1)International Express delivery DHL&FEDEX &UPS&TNT& 7-10days
    2)Shipping by air 7-10 days
    3)shipping by sea, delivery time depends on the destination port.

    2. Technical Support:
    We can provide you with professional technical support. And our products quality guarantee is 6 months. Also, we accept products customized.

    3. Why should you buy from us, not from other suppliers?
    Professional one-to-1 motor customized. The world’s large enterprise of choice for high-quality suppliers. ISO9001:2008 quality management system certification, through the CE, ROHS certification.

    4. How to select models?
    Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

    5. Are you a factory?
    Yes, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

     

    Planetary Gearbox Basics

    If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
    planetarygearbox

    Wheel drive planetary gearboxes

    Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly 3 times the torque of traditional gearboxes while remaining compact and low in mass.
    The planetary gears are made of 3 different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
    Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even 4 wheels.
    A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.

    Spur gears

    There are 2 basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these 2 types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
    There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate 5 times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
    A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are 2 kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
    A planetary gearbox consists of 2 or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
    planetarygearbox

    Helical gears

    A planetary helical gearbox has 2 stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
    A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
    When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
    The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.

    Various sizes

    There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
    The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
    Planetary gearboxes come in different sizes. The most common size is 1 with 2 or 3 planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
    Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
    planetarygearbox

    Applications

    This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
    The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between 2 wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses 1 single transmission system.
    In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
    The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.

    China High Precision Planetary Gear Stepper Motors with Square Shaped Flange Mounting    China High Precision Planetary Gear Stepper Motors with Square Shaped Flange Mounting

    China Planetary Reduction Gear Motor DC Gear Motor 12V 24V Geared DC Motors

    Product Description

    SHN Motors

    1.Features
    1). High efficiency
    2). Long operating life
    3). Low noise
    4). Good temperature rise
    5). Good balance
    6). The most available design for the optimized running.

    2.Related Specifications

    1) 42mm series

    Model DMW421 DMW422 DMW423
    Voltage V 24
    No load speed rpm 5000 5000 5000
    Rated torque Nm 0.063 0.094 0.125
    Rated Speed rpm 4000 4000 4000
    Rated Current A 1.7 2.5 3.5
    Torque(max) Nm 0.19 0.27 0.38
    Back-EMF constant V/Krpm 3.13 3.13 3.15
    Torque Constant Nm/A 0.039 0.04 0.04
    Resistance ohm 1.5 0.53 0.74
    Weight Kg 0.3 0.4 0.5
    Length mm 41 51 6

    2) 70mmSeries

    Model Rated Voltage No load
    speed
    Rated torque Rated Speed Rated
    Current
    Rated
    power
         L
    VDC RPM Nm rpm A W mm
    DMW701 48 3500 0.5 3000 4.3 157 86
    DMW702 48 3500 1 3000 8.7 314 116
    DMW703 48 3500 1.5 3000 12.9 471 136

    3) 80mmSeries

    Model DMW801 DMW802 DMW803
    Voltage V 24
    No load speed rpm 4200 4200 4200
    Rated torque Nm 0.25 0.5 0.75
    Rated Speed rpm 3000 3000 3000
    Rated Current A 5.2 10.5 15
    Rated power W 79 157 236
    Back-EMF constant V/Krpm 9 9.2 9.5
    Torque Constant Nm/A 0.06 0.052 0.05
    Resistance ohm 0.5 0.43 0.35
    Weight Kg 1.6 2.2 3
    Length mm 75 95 115

    4) 86mmSeries

    Model DMW861 DMW862 DMW863
    Voltage V 48
    No load speed rpm 3500 3500 3400
    Rated torque Nm 1.0 1.8 2.5
    Rated Speed rpm 3000 3000 3000
    Rated Current A  8.6 14.8 20
    Torque(max) Nm 3.0 5.4 7.5
    Back-EMF constant V/Krpm 9.8 9.8 10
    Torque Constant Nm/A 0.13 0.13 0.14
    Resistance ohm 0.32 0.15 0.1
    Weight Kg 2.2 3.2 4.2
    Length mm 80 105 130

    5) 60mmSeries

    Model DMW601 DMW602 DMW603
    Voltage V 36
    No load speed rpm 4100 4100 4100
    Rated torque Nm 0.25 0.5 0.75
    Rated Speed rpm 3000 3000 3000
    Rated Current A 3 6 9
    Torque(max) Nm 0.75 1.5 2
    Back-EMF constant V/Krpm 6.2 6.5 6.5
    Torque Constant Nm/A 0.043 0.045 0.041
    Resistance ohm 0.59 0.26 0.2
    Weight Kg 0.9 1.2 1.6
    Length mm 78 99 120

    6) 57mm Series

    Model DMW571 DMW572 DMW573 DMW574
    Voltage V 36
    No load speed rpm 5200 5200 5300 5400
    Rated torque Nm 0.11 0.22 0.32 0.42
    Rated Speed rpm 4000 4000 4000 4000
    Rated Current A 1.8 3.2 4.7 6.5
    Torque(max) Nm 0.3 0.5 0.8 1.2
    Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
    Torque Constant Nm/A 0.072 0.078 0.08 0.09
    Resistance ohm 1.7 0.75 0.5 0.39
    Weight Kg 0.45 0.8 1.1 1.4
    Length mm 55 75 95 115

    7) 57 High Torque

    Model DMW571 DMW572 DMW573 DMW574
    Voltage V 36
    No load speed rpm 5200 5200 5200 5200
    Rated torque Nm 0.14 0.28 0.43 0.49
    Rated Speed rpm 4000 4000 4000 4000
    Rated Current A 2.2 4.5 6.8 7.9
    Torque(max) Nm 0.4 0.6 0.9 1.5
    Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
    Torque Constant Nm/A 0.072 0.078 0.08 0.09
    Resistance ohm 2 0.9 0.7 0.5
    Weight Kg 0.5 0.9 1.3 1.8
    Length mm 55 75 95 115

    3.Outlines/Drawings

    4.About US

    5.Main Products

    6.Package and Shipping

    1.FedEX / DHL / UPS / TNT for samples,Door to door service;
    2.By sea for batch goods;
    3.Customs specifying freight forwarders or negotiable shipping methods;
    4.Delivery Time:20-25 Days for samples;30-35 Days for batch goods;
    5.Payment Terms:T/T,L/C at sight,D/P etc.

    7.FAQ
    Q1. When can I get the quotation?
    We usually quote within 24 hours after we get your inquiry.
    If you are urgent to get the price, please send the message on  and  or call us directly.

    Q2. How can I get a sample to check your quality?
    After price confirmed, you can requiry for samples to check quality.
    If you need the samples, we will charge for the sample cost.
    But the sample cost can be refundable when your quantity of first order is above the MOQ

    Q3. Can you do OEM for us?
    Yes, the product packing can be designed as you want.

    Q4. How about MOQ?
    1 pcs for carton box.

    Q5. What is your main market?
    Eastern Europe, Southeast Asia, South America.
     
    Please feel  free to contact us if you have any question.

     

    What is a Planetary Gearbox?

    A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

    planetary gearboxes

    If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
    Planetary gearboxes use 3 different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the 2 gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
    There are 3 main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than 1 output shaft, allowing the user to choose the configuration and torque that is best for their application.
    One of the main differences between a planetary gearbox and a conventional 1 is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install 1 with ease.
    A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
    A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
    planetarygearbox

    planetary gearboxes with output shaft

    The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
    The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
    As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are 2 or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
    An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
    Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
    A planetary gearbox can have 3 components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These 3 components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
    planetarygearbox

    planetary gearboxes with integer number of teeth

    When designing a planetary gearbox, 1 must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
    In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
    In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
    The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
    The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
    A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
    As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

    China Planetary Reduction Gear Motor DC Gear Motor 12V 24V Geared DC Motors    China Planetary Reduction Gear Motor DC Gear Motor 12V 24V Geared DC Motors

    China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors

    Product Description

    China Manufacturer High Quality 12V 24 volt micro bldc motors / brushless planetary gear motors

    Specification

    Voltage: 12V- 310V
    Power:  15W-400W
    Rated Speed: 2000-3000RPM
    Output Speed: Customized
    Torque: Customized
    Diameter of gearbox: 60-104cm
     

    Detailed Pictures


     

    Greensky Mechanical Products include:

    1. AC (gear) motor
    2. DC & BLDC (gear) motor
    3. Worm gearbox
    4. Helical gearbox
    5. Coreless motor
    6. External rotor motor
    7. Motor controller
    8. Customized motor

    If you have projects that need motors and gear boxes, please freely contact me.

    Company Overview

      

    About Greensky Mechanical

    • History: Greensky Mechanical is a motor brand of Greensky power company Limited. The brand Greensky Mechanical was founded in 2012 with investing in a 15 year old motor factory in ZHangZhoug Province. Greensky Power brought new management concept to the new joint company and increase the quality of the motors as Greensky Power always provides stable and good quality and service to the society. The Positioning of the brand is medium & high quality level. Our customers are mainly in Europe. We save cost by increasing the efficiency of production and delivery. 
    • Market: Greensky has customers in 30 different countries. Germany, Austria, Japan, USA and Middle-East are our main market .
    • Mission:  “Once and forever” is our goal to serve customers in the world. Once we do business with customer, we will do business forever.

    The advantages of working with us are:

    1.  Convenience. We can provide all types of motor & gearbox by manufacturing and out sourcing.
    2.  High Quality. All products are <1% defect rate with ≥ 1 year guarantee.
    3.  Low Cost. We seriously reduce cost on material, processing, assembling, packing and delivery.
    4.  Flexible service. MOQ below 10pcs & customize available & urgent order solution.
    5.  Fast response. Our principle is response in 15 minutes and provide solution in 24 hours.

    We hope you enjoy cooperating with us.
     

    What is a Planetary Gearbox?

    A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

    planetary gearboxes

    If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
    Planetary gearboxes use 3 different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the 2 gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
    There are 3 main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than 1 output shaft, allowing the user to choose the configuration and torque that is best for their application.
    One of the main differences between a planetary gearbox and a conventional 1 is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install 1 with ease.
    A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
    A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
    planetarygearbox

    planetary gearboxes with output shaft

    The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
    The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
    As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are 2 or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
    An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
    Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
    A planetary gearbox can have 3 components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These 3 components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
    planetarygearbox

    planetary gearboxes with integer number of teeth

    When designing a planetary gearbox, 1 must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
    In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
    In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
    The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
    The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
    A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
    As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

    China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors    China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors

    China best Mute Noise Direct-Current Planetary Gear Box Micor Gearbox for Electric Motors / Motor Machines with Great quality

    Solution Description

    We offer you OEM metal planetary gearbox for  electornic motor, electrical machinery through Powder metallurgy and Steel injection molding method .

    Powder metallurgy (PM) is a phrase covering a wide assortment of techniques in which supplies or factors are produced from steel powders. PM processes can stay away from, or significantly reduce, the require to use metallic elimination processes, therefore drastically reducing produce losses in manufacture and often ensuing in decrease costs.

    The powder metallurgy push and sinter process normally is made up of 3 simple steps: powder mixing (pulverisation), die compaction, and sintering. Compaction is typically done at room temperature, and the elevated-temperature method of sintering is normally carried out at atmospheric stress and below very carefully managed environment composition. CZPT secondary processing this sort of as coining or heat treatment often follows to receive special homes or improved precision.

    Tailored metallic areas specification
     

     PM Approach has a high degree of flexibility making it possible for the tailoring of the actual physical attributes of a product to suit your specific residence and overall performance needs. These contain:

    • Structural pieces with complicated styles
    • Controlled Porosity
    • Managed performance
    • Good overall performance in pressure and absorbing of  vibrations
    • Particular homes such as hardness and dress in resistance
    • Fantastic precision and great area complete
    • Big collection of pieces with slim tolerances

    Personalized components

    Workshop

     

    The Basics of a Planetary Gearbox

    The basic product of a planetary gearbox is a very successful transmission that transmits virtually ninety per cent of the energy it receives. The standard planetary gearbox comes in three simple sorts: Inline, Helical, and Spur. Beneath, we will discuss the variations among each and every of them and which one particular is much better for your needs. A planetary gearbox is an critical portion of any motor and might be the excellent choice for your automobile.
    planetarygearbox

    Inline planetary gearbox

    An inline planetary gearbox has an inline arrangement of gears that permits the transfer of electricity. Its design makes it secure and dependable, and the area and weight-saving rewards make it a well-known option for a lot of applications. Planetary gearboxes have low inertia, large torque, and a wide assortment of reduction ratios, which make them a adaptable choice for a lot of industries. To locate out much more about this kind of gearbox, read through about its development and technical specs.
    A planetary gearbox is composed of two areas: a sun gear (also called the central or input equipment), and two world gears (also referred to as outer gears). These gears are related to each and every other via a carrier. In get to get the ideal performance from your gearbox, it’s essential to discover a product with the characteristics and rewards necessary for your software. Also, be sure to check out out the delivery time, global availability, and client support of your chosen constructor. A few constructors are more quickly than other individuals and have the capability to respond rapidly, whilst other people can supply every one planetary gearbox out of stock.
    Whether you happen to be employing an inline planetary gearbox for your car’s transmission, or you happen to be building a new machine, it is important to decide on the appropriate measurement for your application. The most typical ratio is five:1, but an inline gearbox can be as substantial as a thousand:1! The torque selection is between 250-950 lb-in for ongoing torque, and up to 5800 lb-in for generate torque. Some companies even offer custom made shafts if you want them to suit a specific software.
    Inline planetary gearboxes have a large ratio of helical rotation and are valuable for programs where space is restricted. Their reduced-backlash layout allows them to take care of higher torques and higher accelerations without having backlash. Regardless of their compact dimension, planetary gear systems also have large single-phase reduction ratios, a characteristic that makes them ideal for a range of industrial apps. They can also be connected for higher reduction ratios.
    An inline planetary gearbox can be utilized in several applications, from small equipment to weighty industrial equipment. Its fundamental style consists of three factors: an input equipment pair, an output gear pair, and a stationary situation. Some planetary gearbox styles also consist of added equipment sets that can provide a slight offset between input and output. A planetary gearbox may possibly also incorporate a number of bearings, which make the assembly much more robust and reputable.
    Inline planetary gear reducers are generally employed in industrial settings to sluggish down an electrical motor. They are capable to multiply torque, which means they can minimize the enter speed to a amount exactly where the mechanical units inside the motor can perform appropriately. This variety of equipment reducer also has a lower clearance, which tends to make it excellent for devices with higher torque. Nonetheless, you should think about the sum of torque needed in your software before you make a purchase.
    planetarygearbox

    Helical planetary gearbox

    A helical planetary gearbox is a variety of mechanical technique. The gears are connected by joints to the provider that holds the planets stationary. The sun equipment serves as an input to the other gears, and the world gears rotate at a price that relies upon on the quantity of tooth in each and every equipment. The ratio among these gears is -Ns/Np, and the variety of teeth in the ring is N r, N s, and N p.
    One more type of planetary gearbox utilizes several helical axes to distribute the load. This style also gives substantial stiffness and minimal backlash, which is critical for purposes involving regular begin-stop cycles and rotational course adjustments. It also functions a compact layout and reduced mass inertia. A helical planetary gearbox can be utilised for a wide selection of applications. Detailed beneath are some of the advantages of helical gear technological innovation.
    The standard style of a helical planetary equipment is based mostly on the theory of stepping planets. This notion eradicates the require for timing marks and restrictive assembly circumstances. The planetary gear’s helical shape can be modified to accomplish a better transmission ratio in an equivalent or smaller sized volume. For case in point, a 50-T ring gear will produce the identical impact as a a hundred-T ring equipment.
    In addition to the helical axis, a helical planetary gearbox also has a broad range of secondary attributes that are crucial to torque transmission. For occasion, compact needle roller bearings are proper for a helical planetary gearbox due to the fact of their reduced-profile design and small area. However, a tapered roller bearing is far better suited to dealing with large axial forces. In standard, a helical planetary gearbox will have a higher effectiveness price and reduced sounds ranges.
    A helical planetary gearbox will have a quantity of elements that can range in measurement and shape. They will incorporate a solar equipment and many planetary areas. The central solar equipment will just take a lower-torque enter and will run a number of exterior gears to increase the torque and velocity. This fundamental product of a planetary gearbox is very efficient, transferring ninety seven% of the energy enter. There are three primary kinds of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
    The CZPT is a excellent illustration of an entry-degree helical planetary gearbox. It is very reputable and aimed at providing torque in peaceful apps with substantial precision. The Entry sequence is another choice, which is made to meet the demands of the lower-backlash planetary gearbox market place. It features helical planetary gears with 5 to eight arc-minutes backlash, and is constructed on a monobloc housing.
    A helical planetary gearbox is extensively employed in 3D printing. They are light-weight and can offer a higher gear ratio. In addition to their lower bodyweight and substantial effectiveness, some people have mounted them into 3D printers to boost the accuracy of their types. And in addition to 3D printing, helical gears are utilised in many industrial programs. If you’re thinking about buying one, you need to know what the rewards are.
    planetarygearbox

    Spur planetary gearbox

    There are a lot of positive aspects to a spur planetary gearbox, from its compact design and low value to its unmatched electrical power transmission capability for every device volume. Planetary gears have large effectiveness per phase and can attain up to 95% efficiency, based on the ratio. Planet gears are mounted on a joint provider, and the output rotation pace is slower than the drive rotation velocity, which prospects to enhanced torque. The larger the gear wheels, the a lot more torque the device can create.
    A spur planetary gearbox incorporates several other gear sets that should have helical enamel. These other gear sets need to be helical, and the motor have to be aligned with the driven elements. The spur gears are the most productive variety of planetary gear, as their tooth are symmetrical, which signifies no axial forces are generated. The distinction between a spur and a planetary gearbox is its shape.
    The appropriate angle spur planetary gearbox is a versatile design and style with a spiral bevel gear that supplies excellent smoothness and tranquil procedure. This gearhead is circumstance-hardened and ground to enhance its performance. These gears can be acquired in 3-a hundred ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
    A spur planetary gearbox utilizes spur gears about the circumference of the mechanism. The spur gears rotate between gears that have inner and external tooth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and solar gears. A spur gearbox can also be considered a compound planetary equipment. It is typically utilised for servo programs. Unlike spur gears, helical planetary gears are less complicated to keep and have lower sound ranges.
    The most notable variation amongst a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur equipment head is considerably less sophisticated, but are not able to handle the same amount of load as a planetary gearhead. Equally types can attain the very same backlash, but a planetary gearhead has much better lubrication retention than a spur equipment. It can run at greater speeds without having abnormal lubrication, although a spur gear generate is far more productive at reduced speeds. The reduction ratio of a planetary gearhead is around unity while that of a planetary equipment head is several thousand to one particular.
    A planetary gearbox has several applications. Plastic equipment, goods & staff lifts, and machine tools are all primary examples of these sorts of gearing techniques. Other industries that use these gears include wind turbines and sugar crystallizers, as properly as metal and sugar mills. And of system, the use of planetary gears is not restricted to these industries. It is used in several different ways, like slewing drives, mill travel, and derrick & dockyard cranes

    China best Mute Noise Direct-Current Planetary Gear Box Micor Gearbox for Electric Motors / Motor Machines     with Great qualityChina best Mute Noise Direct-Current Planetary Gear Box Micor Gearbox for Electric Motors / Motor Machines     with Great quality